21 Nov 2014

Help, There Is White Foam In My Swimming Pool!

0 Comment

14383880089_5ae5dee123

White foam in the pool can really be a mood killer and it can make the beautiful, crystal-blue water in the pool look rather unattractive. This problem can be caused by several factors and if you want to enjoy swimming in the pool with your family members or friends, you do need to address this issue immediately. Here is what you need to know about white foam and how to get rid of it from the pool.

What causes the white foam in the pool?

This unpleasant foam gets created at the surface of the water because the calcium levels in the pool are quite low. Similarly, white foam can form in the pool because of the algaecides used by the homeowner. Lastly, white foam can be caused by leaks in the air system and this is usually the most common cause. Still, there are solutions to these problems and they are not hard to put into practice.

Raise the calcium levels in vinyl pools

A lot of homeowners have pools made from vinyl and usually in these cases, white foam tends to form at the surface of the water because the calcium levels are low. Therefore, all that homeowners have to do is to raise the calcium hardness of the water to something between 100 and 150 ppm or even more if it is possible. This will usually do the trick and the white foam will disappear afterwards.

Change the algaecides you are using

On the other hand, in some cases the white foam is caused by the algaecides used by the homeowner. Usually, these items are also known as linear quats and they contain a special ingredient which tends to cause foam formation. To prevent this and get rid of white foam from the pool once and for all, homeowners might want to invest in PolyQuat 60 algaecide which is safer. The Polyquat will break down algaecides in about a week and it will not cause the formation of white foam at the surface of the water. This type of algaecide should be added in the pool once every week. Also, in order to breakdown algaecide faster, homeowners might want to add chlorine as well.

Check the air system for leaks

Finally, if the white foam is caused by air leaks then the homeowner must inspect the air system immediately. First of all, he should check the water level in the skimmer and be absolutely sure that it is not taking air. Secondly, homeowners should check the hoses, clamps, plumbing fittings and strainer o-ring. Also, the pump strainer lid should be checked for damage. If any of these elements don’t work properly or show signs of deterioration then they need to be repaired or replaced immediately.

If you don’t have the time and expertise to check your pool by yourself, and you want to get rid of the white foam fast then call our specialists. We can fix any problem you might have with your pool in a timely fashion and for an affordable price!

[top]

Leave a Reply

Your email address will not be published. Required fields are marked *