17 Sep 2014

Getting Rid Of Algae In The Swimming Pool

0 Comment

4279395371_5b7c7497d2

A widespread problem with many swimming pools is algae proliferation. Clearing it up can be either a complicated or simple affair, depending on the type. The commonest method of algae removal in pools consist of brushing, scrubbing, vacuuming and then adding some type of specialized shock chemicals to the water. According to professionals, the best way to deal with algae in swimming pools is to prevent it from growing in the first place. Apart from turning water into a filthy green color, algae encourage the growth of harmful micro-organisms in the water, and not forgetting making the surface slippery while at it. Here is how to go about removing algae from a pool.

Skim the top to remove free-floating debris and algae

The moment algae are first noticed in a pool, the top layer of the pool water need to be skimmed to help remove the free-floating debris and algae.

Start by brushing off the pool floor and walls

The second step in algae removal in a pool is brushing it off from the walls and floors. Green algae are the easiest to brush off, while the yellow variety is more difficult to remove. The hardest and most difficult to brush off is the black algae. This requires a thorough scrubbing and brushing work. Pools devoid of vinyl liners should be scrubbed with a brush with steel bristles while those with liners, for instance above the ground pools, should be brushed with a nylon bristle pool brush.

The right brush should be used to scrub the surfaces, even in spots where algae is not visible. After thoroughly scrubbing the surfaces to loosen the algae and other free-floating debris, let the pool settle for approximately thirty minutes. Vacuumed up the surface should be done at this stage and collected algae disposed of appropriately, but away from then pool.

Shock the pool

Shock treatment is the next step where algae removal in a pool is concerned. There are a number of different pool shock chemicals that can be opted for. The chosen cleaning expert will advice on the best among these chemicals to suit the immediate or future pool cleaning requirements. Pool shock chemicals need to be chosen in accordance with the type of the used filter.

According to the experts, the right quantity of shock chemicals should be added to the water. This however depends on the amount of water in a pool. If the pool has a vinyl lining, then the selected shock chemical need to be mixed with some water before being added to prevent bleaching or discoloration effects. The shock chemicals should be circulated around with a skimmer for a uniform circulation. At this stage, the pool should be brushed once again.

A properly done shock treatment can save the pool owner the frustration and headache of having to deal with algae in the pool. A weekly treatment regimen should be started with to destroy new algae colonies that are just starting. This also helps in the maintenance of the proper chemical balances in a pool. All in all, when a pool is not in use, it should be kept clean, free from leaves, sticks and other debris. It should also be properly covered with the right pool cover for better protection.

[top]

Leave a Reply

Your email address will not be published. Required fields are marked *